CARBURETOR MODEL 2140
|
|
||
|
|
||
|
|
ORDER OF REMOVAL / PART PART NAME | |
|
|
||
|
32. |
(2) Main Jets* | |
|
33. |
Power |
Valve* |
|
34. |
Power |
Valve Gasket* |
|
35. |
Pump |
Check Valve Retainer Spring |
|
36. |
Pump |
Check Valve Ball* |
|
37. |
Pump |
Rod Lubricating Ring Washer* |
|
38. |
Pump |
Rod Lubricating Ring* |
Follow the procedure given in the Service Manual for the disassembly of the main body assembly with the following variations.
(a) Omit Step 5.
Figure 3. Removing Secondary Jets
(b) After Step 9 has been completed, using 3/8" open-end wrenches, remove and discard the secondary jets and gaskets.
(c) Complete the disassembly of the main body assembly.
D. DISASSEMBLY - THROTTLE BODY
(*) Replacement should be made from the Master Repair Kit.
|
ORDER OF REMOVAL / PART NAME | |
|
1. |
Fuel Inlet Fitting |
|
2. |
Fuel Inlet Fitting Gasket* |
|
3. |
Filter Screen Assembly* |
|
4. |
Filter Screen Retainer Spring* |
|
5. |
(2) Idle Adjusting Needles* |
|
6. |
(2) Idle Adjusting Needle Springs |
|
7. |
Distributor Check Valve Retainer |
|
8. |
Distributor Check Valve* |
|
9. |
(4) Choke Plate Screws and |
|
Lockwashers | |
|
10. |
(2) Choke Plates |
|
11. |
Choke Shaft Nut and Lockwasher |
|
12. |
Choke Lever |
|
13. |
Choke Shaft |
|
14. |
(2) Nozzle Tube Extensions |
|
15. |
Secondary Throttle Rod Retainer* |
|
16. |
Secondary Throttle Rod Washer |
|
17. |
Secondary Throttle Rod Pin* |
|
18. |
Secondary Throttle Rod |
|
19. |
Fast Idle Cam Retainer |
|
20. |
Fast Idle Cam |
|
21. |
Spark Valve* |
|
22. |
Spark Valve Gasket* |
|
23. |
Spark Valve Restriction* |
|
24. |
Diaphragm Housing Cover Screw and |
|
Lockwasher | |
|
25. |
Diaphragm Housing Cover |
|
26. |
Diaphragm Link Retainer* |
|
27. |
(4) Diaphragm Cover Screws and |
|
Lockwashers | |
|
28. |
Diaphragm Cover |
|
29. |
Diaphragm Spring |
|
30. |
Diaphragm and Link Assembly* |
|
31. |
Diaphragm Lever Screw and |
|
Lockwasher | |
|
32. |
Diaphragm Lever |
|
33. |
(3) Diaphragm Housing Screws and |
|
Lockwashers | |
|
34. |
Diaphragm Housing |
|
35. |
Diaphragm Housing Gasket* |
|
36. |
Dashpot Nut and (2) Lockwashers |
|
37. |
Dashpot Assembly |
|
38. |
(2) Dashpot Bracket Screws and |
|
Lockwashers | |
|
39. |
Dashpot Bracket |
The following is a list of all parts removed in disassembling the throttle body assembly. Parts to be discarded are marked with an asterisk
Follow the Service Manual for the disassembly of the throttle body assembly with the following